{"title":"Hood Vents","description":null,"products":[{"product_id":"1997-2004-c5-corvette-t1-hood-louvers-kit","title":"1997-2004 C5 Corvette T1 Hood Louvers Kit","description":"\u003cp\u003e1997-2004 C5 Corvette T1 Hood Louvers Kit\u003c\/p\u003e\n\u003cp\u003eCurrently used on multiple winning SCCA\/NASA ST2, T1 and GT2 race cars.\u003cbr\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion\u003cbr\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce.\u003cbr\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay.\u003cbr\u003eMaximize life of engine accessories by reducing overall operating temperature.\u003cbr\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures.\u003cbr\u003eLouver backbone design maintains hood structural rigidity.\u003cbr\u003eContoured to fit your specific hood curve.\u003cbr\u003eInstalls easily with supplied templates.\u003cbr\u003eIncluded in kit: Templates for cutting, rivets, washers, installation instructions, and necessary spacers for a factory quality installation.\u003cbr\u003ePowder coated Satin Black for clean appearance and durability.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003cbr\u003eCenter Vent:\u003cbr\u003e13\" Height\u003cbr\u003e15\" Front Width\u003cbr\u003e20\" Rear Width\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSide Vent\u003c\/strong\u003e\u003cbr\u003e17\" Height\u003cbr\u003e11\" Front Width\u003cbr\u003e9\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916826538165,"sku":"C5T1HL","price":359.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/1997-2004-c5-corvette-t1-hood-louvers-kit.jpg?v=1785522365"},{"product_id":"1997-2004-c5-corvette-gt1-hood-louver-kit","title":"1997-2004 C5 Corvette GT1 Hood Louver Kit","description":"1997-2004 C5 Corvette GT1 Hood Louver Kit\u003cbr\u003e\nDesigned specifically for the C5 corvette hood lines and low pressure zones behind the radiator and above the wheel arches.\u003cbr\u003e\nIncludes large GT1 center and T1 sides. This is the largest C5 Corvette kit we offer.\u003cbr\u003e\nAdd Xtreme Flow 3D wickers to improve flow 4x in options\u003cbr\u003e\u003cbr\u003e\n\nCurrently used on multiple winning SCCA\/NASA ST2, T1 and GT2 race cars.\u003cbr\u003e\nOptimized louver design to maximize extraction flow velocities within a vehicle in motion\u003cbr\u003e\nReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce.\u003cbr\u003e\nSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay.\u003cbr\u003e\nMaximize life of engine accessories by reducing overall operating temperature.\u003cbr\u003e\nIncreases dense, cold air flow thru radiator to promote lower coolant temperatures.\u003cbr\u003e\nLouver backbone design maintains hood structural rigidity.\u003cbr\u003e\nContoured to fit your specific hood curve.\u003cbr\u003e\nInstalls easily with supplied templates.\u003cbr\u003e\nIncluded in kit: Templates for cutting, rivets, washers, installation instructions, and spacers necessary for a factory quality installation.\u003cbr\u003e\nPowder coated Satin Black for clean appearance and durability.\u003cbr\u003e\u003cbr\u003e","brand":"TrackSpec","offers":[{"title":"Silver \/ No Thanks","offer_id":52916826669237,"sku":"C5GT1HL-silver","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/1997-2004-c5-corvette-gt1-hood-louver-kit-4.jpg?v=1785522377"},{"product_id":"1997-2004-c5-corvette-gt2-hood-louver-kit","title":"1997-2004 C5 Corvette GT2 Hood Louver Kit","description":"Designed specifically for the C5 corvette hood lines and low pressure zones behind the radiator and above the wheel arches.\u003cbr\u003e\nIdeal set up for those with tilted radiator placement and ductwork leading to hood vents\u003cbr\u003e\nOversized center section for maximized flow.\u003cbr\u003e\u003cbr\u003e\n\n\nCurrently used on multiple winning SCCA\/NASA ST2, T1 and GT2 race cars.\u003cbr\u003e\nOptimized louver design to maximize extraction flow velocities within a vehicle in motion\u003cbr\u003e\nReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce.\u003cbr\u003e\nSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay.\u003cbr\u003e\nMaximize life of engine accessories by reducing overall operating temperature.\u003cbr\u003e\nIncreases dense, cold air flow thru radiator to promote lower coolant temperatures.\u003cbr\u003e\nLouver backbone design maintains hood structural rigidity.\u003cbr\u003e\nContoured to fit your specific hood curve.\u003cbr\u003e\nInstalls easily with supplied templates.\u003cbr\u003e\nIncluded in kit: Templates for cutting, rivets, washers, installation instructions, and spacers necessary for a factory quality installation.\u003cbr\u003e\nPowder coated Satin Black for clean appearance and durability.\u003cbr\u003e\u003cbr\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916827979957,"sku":"C5GT2HL","price":367.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/1997-2004-c5-corvette-gt2-hood-louver-kit.jpg?v=1785522387"},{"product_id":"2005-2013-c6-corvette-t1-hood-louvers-kit","title":"2005-2013 C6 Corvette T1 Hood Louvers Kit","description":"\u003cdiv class=\"box-collateral\"\u003e\n\u003cp\u003e2005-2013 C6 Corvette T1 Hood Vent  \/ Louvers Kit\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrently used on multiple winning SCCA\/NASA ST2, T1 and GT2 race cars. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, installation instructions, and necessary spacers for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003cbr\u003eCenter\u003cbr\u003e13\" Height\u003cbr\u003e15\" Front Width\u003cbr\u003e20\" Rear Width\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSide Vent\u003c\/strong\u003e\u003cbr\u003e14\" Height\u003cbr\u003e4\" Front Width\u003cbr\u003e5.5\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916828143797,"sku":"C6T1HL","price":339.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/2005-2013-c6-corvette-t1-hood-louvers-kit.jpg?v=1785522407"},{"product_id":"2005-2013-c6-corvette-fender-vents","title":"2005-2013 C6 Corvette Fender vents","description":"\u003cdiv class=\"box-collateral\"\u003e\n\u003cp\u003e2005-2013 C6 Corvette Fender Vents\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, and installation instructions for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916829028533,"sku":"C6T1FV","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/2005-2013-c6-corvette-fender-vents.jpg?v=1785522423"},{"product_id":"1969-1976-c3-corvette-l88-hood-louver-kit","title":"1969-1976 C3 Corvette L88 Hood Louver Kit","description":"\u003cp\u003e1969-1976 C3 Corvette L88 Hood Louver Kit \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"box-collateral\"\u003e\n\u003cul\u003e\n\u003cli\u003eCurrently used on multiple winning SCCA\/NASA ST2, T1 and GT2 race cars. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, installation instructions, and necessary spacers for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eAlso fits cowl style hood of later C3 corvettes. Please check measurements before ordering or contact us.\u003cbr\u003eMeasurements: 15.5\" wide and 15.5\" tall with V shape.\u003cbr\u003eIncludes 1 center section vent with all installation hardware.\u003cbr\u003eWARNING!!! NOTE: The louvers protrude below the hood surface approx. 7\/8\". Be sure to check hood clearance to assure there will not be clearance issues. Some high rise manifolds and air cleaners may interfere so please check!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003cbr\u003e15.5\" Height\u003cbr\u003e15.5\" Front Width\u003cbr\u003e15.5\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916829421749,"sku":"C388LGHL","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/1969-1976-c3-corvette-l88-hood-louver-kit.jpg?v=1785522437"},{"product_id":"1969-1976-c3-corvette-fender-vent-kit","title":"1969-1976 C3 Corvette Fender Vent Kit","description":"1969-1976 C3 Corvette Fender Vent Kit\u003cbr\u003e\n\n\u003cdiv class=\"box-collateral\"\u003e\n        \u003cul\u003e\n\u003cli\u003eCurrently used on multiple winning SCCA\/NASA ST2, T1 and GT2 race cars.\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature.\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, installation instructions, and necessary spacers for a factory quality installation. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability. \n\u003c\/li\u003e\n\u003c\/ul\u003e    \u003c\/div\u003e\n\n\u003cbr\u003e\u003cbr\u003e\nDimensions:\u003cbr\u003e\n17\" Height\u003cbr\u003e\n9\" Front Width\u003cbr\u003e\n8.5\" Rear Width\u003cbr\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916829552821,"sku":"C3CORFV","price":239.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/1969-1976-c3-corvette-fender-vent-kit.jpg?v=1785522449"},{"product_id":"1984-1996-corvette-c4-t1-hood-vent-kit","title":"1984-1996 Corvette C4 T1 Hood Vent Kit","description":"1984-1996 Corvette C4 T1 Hood Vent Kit\u003cbr\u003e\n\n\u003cdiv class=\"box-collateral\"\u003e\n        \u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature.\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, installation instructions, and necessary spacers for a factory quality installation. \n\u003cbr\u003e    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916829683893,"sku":"C4T1HL","price":359.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/1984-1996-corvette-c4-t1-hood-vent-kit.jpg?v=1785522477"},{"product_id":"1967-1968-mustang-hood-vents","title":"1967-1968 Mustang Hood Vents","description":"1967-1968 Mustang Hood Vents\n\u003cbr\u003e\n\u003cdiv class=\"box-collateral\"\u003e\n        \u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature.\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, and installation instructions for a factory quality installation. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability. \n\u003c\/li\u003e\n\u003c\/ul\u003e    \u003c\/div\u003e\n\u003cbr\u003e\n\nDimensions:\u003cbr\u003e\n23.5\" Height\u003cbr\u003e\n13.5\" Front Width\u003cbr\u003e\n23.5\" Rear Width\u003cbr\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916831912117,"sku":"6768MUSTHL","price":339.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/1967-1968-mustang-hood-vents-2.jpg?v=1785522485"},{"product_id":"2003-2004-mustang-cobra-hood-louver-kit","title":"2003-2004 Mustang Cobra Hood Louver Kit","description":"Designed specifically for 03-04 Cobra mustang hoods.\u003cbr\u003e\nReplaces factory non functional plastic vents with functional heat extractors.\u003cbr\u003e\nMade of aircraft grade aluminum to increase strength and reduce weight.\u003cbr\u003e\nReplace your broken plastic cobra hood vents with functional heat extractors!\u003cbr\u003e\nThis kit includes both driver and passenger hood vents, hardware, and backing plates.\u003cbr\u003e\nMay fit aftermarket cobra hoods that accept factory plastic vents.\u003cbr\u003e\u003cbr\u003e\n\n\n\u003cdiv class=\"box-collateral\"\u003e\n        \u003cul\u003e\n\u003cli\u003eCurrently used on multiple winning SCCA\/NASA ST2, T1 and GT2 race cars.\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature.\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied instructions\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Hood Vents, backing plates, mounting hardware, and installation instructions.  \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability. \n\u003c\/li\u003e\n\u003c\/ul\u003e    \u003c\/div\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916833943733,"sku":"34CBRDR","price":224.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/2003-2004-mustang-cobra-hood-louver-kit.jpg?v=1785522495"},{"product_id":"2003-2004-mustang-cobra-competition-kit","title":"2003-2004 Mustang Cobra Hood Louver Competition Kit","description":"Designed to sit perfectly in the recessed area of your 03-04 cobra hood\u003cbr\u003e\n\nExtends your factory cobra nostrils to a full heat extractor hood.\u003cbr\u003e\nUse in conjunction with our cobra direct replacement nostril kit for max flow and a factory like appearance.\u003cbr\u003e\n\nTHIS KIT REQUIRES CUTTING YOUR HOOD.\u003cbr\u003e\u003cbr\u003e\n\n\u003cdiv class=\"box-collateral\"\u003e\n        \u003cul\u003e\n\u003cli\u003eCurrently used on multiple winning SCCA\/NASA ST2, T1 and GT2 race cars.\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature.\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied instructions\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Hood Vents, backing plates, mounting hardware, and installation instructions.  \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability. \n\u003c\/li\u003e\n\u003c\/ul\u003e    \u003c\/div\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916833976501,"sku":"34CBRGT2","price":243.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/2003-2004-mustang-cobra-competition-kit.jpg?v=1785522507"},{"product_id":"2005-2009-mustang-gt2-hood-louvers-kit","title":"2005-2009 Mustang GT2 Hood Louvers Kit","description":"\u003cp\u003eDesigned specifically for 05-09 S197 Mustang hood lines and low pressure zones behind the radiator and above the wheel arches. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"box-collateral\"\u003e\n\u003cul\u003e\n\u003cli\u003eCurrently used on multiple winning SCCA\/NASA ST2, T1 and GT2 race cars. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, installation instructions, and necessary spacers for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003cbr\u003eCenter\u003cbr\u003e13\" Height\u003cbr\u003e15\" Front Width\u003cbr\u003e20\" Rear Width\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSide Vents\u003c\/strong\u003e\u003cbr\u003e17\" Height\u003cbr\u003e11\" Front Width\u003cbr\u003e9\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916836630709,"sku":"M97GT2HL","price":359.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/2005-2009-mustang-gt2-hood-louvers-kit.jpg?v=1785522520"},{"product_id":"2005-2009-mustang-gt500-hood-louvers-kit","title":"2005-2009 Mustang GT500 Hood Louvers Kit","description":"Designed specifically for GT500 hood lines, nostril profiles, and low pressure zones behind the radiator\u003cbr\u003e\n\u003cbr\u003e\n\u003cdiv class=\"box-collateral\"\u003e\n        \u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature.\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, installation instructions, and necessary spacers for a factory quality installation. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability. \n\u003c\/li\u003e\n\u003c\/ul\u003e    \u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\nDimensions:\u003cbr\u003e\n22\" Height\u003cbr\u003e\n10.5\" Front Width\u003cbr\u003e\n13.5\" Rear Width\u003cbr\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916836860085,"sku":"M97GT5HL","price":354.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/2005-2009-mustang-gt500-hood-louvers-kit.jpg?v=1785522535"},{"product_id":"2010-2012-mustang-hood-louvers-kit","title":"2010-2012 Mustang Hood Louvers Kit","description":"\u003cp\u003eDesigned specifically for 2010-2012 mustang factory bulged hood and low pressure zones behind the radiator. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"box-collateral\"\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, installation instructions, and necessary spacers for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003cbr\u003e19\" Height\u003cbr\u003e11.5\" Front Width\u003cbr\u003e12.25\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916837318837,"sku":"1012MUSHL","price":334.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/2010-2012-mustang-hood-louvers-kit.jpg?v=1785522549"},{"product_id":"2013-2014-mustang-direct-replacement-louver-kit","title":"2013-2014 Mustang Direct Replacement Louver Kit","description":"2013-2014 Mustang Direct Replacement Louver Kit\u003cbr\u003e\u003cbr\u003e\n\nThis kit includes a pair of vents that replace the factory plastic non functional vents.\u003cbr\u003e\nThis kit DOES NOT require cutting or drilling. Installation is less than 30 minutes start to finish with no cutting or drilling.\u003cbr\u003e\nIncludes backing plates to assure a clean install.\u003cbr\u003e\nIncreased flow area openings over factory vents.\n\n\u003cbr\u003e\u003cbr\u003e\n\n\u003cdiv class=\"box-collateral\"\u003e\n        \u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature.\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, installation instructions, and necessary spacers for a factory quality installation. \n\u003cbr\u003e    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cbr\u003e\n\n\nDimensions:\u003cbr\u003e\n20.5\" Height\u003cbr\u003e\n4\" Front Width\u003cbr\u003e\n4.75\" Rear Width\u003cbr\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916837580981,"sku":"1314MUSTHL","price":234.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/2013-2014-mustang-direct-replacement-louver-kit.jpg?v=1785522564"},{"product_id":"2013-2014-mustang-gt4-race-louver-kit","title":"2013-2014 Mustang GT4 Race Louver Kit","description":"\u003cp\u003e2013-2014 Mustang GT4 Race Vent Louver Kit\u003c\/p\u003e\n\u003cp\u003eThis kit includes a pair of vents that replace the factory plastic non functional vents on a 13-14 Mustang. These CAN be installed on any hood even if it is not for a GT or direct replacement.\u003cbr\u003eAlso includes GT4 style center vent. Optional notched center for Boss 302 intake clearance\u003cbr\u003eThis kit DOES require cutting into your factory hood.\u003cbr\u003eIncreased flow area openings over factory vents.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"box-collateral\"\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, installation instructions, and necessary spacers for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003cbr\u003eSide vents\u003cbr\u003e20.5\" Height\u003cbr\u003e4\" Front Width\u003cbr\u003e4.75\" Rear Width\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGT4 Center vent\u003c\/strong\u003e\u003cbr\u003e18.5\" Height\u003cbr\u003e20.25\" Front Width\u003cbr\u003e22.5\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916838006965,"sku":"1314MUSTGT4","price":389.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/2013-2014-mustang-gt4-race-louver-kit.jpg?v=1785522579"},{"product_id":"2015-2017-mustang-gt-direct-replacement-hood-louvers","title":"2015-2017 Mustang GT Direct Replacement Hood Louvers","description":"2015-2017 Mustang GT Direct Replacement Hood Louvers\n\u003cbr\u003e\u003cbr\u003e\nThis kit includes only 1 driver and 1 passenger hood louver with backing plates\u003cbr\u003e\nAlso Includes backing plates for secure mounting. DOES NOT REQUIRE DRILLING.\u003cbr\u003e\nMinor cutting of the hood involved to make clearance for the vents and to allow air to flow.\u003cbr\u003e\u003cbr\u003e\n\n\n\u003cdiv class=\"box-collateral\"\u003e\n        \u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature.\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, installation instructions, and necessary spacers for a factory quality installation. \n\u003cbr\u003e    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\nDimensions:\u003cbr\u003e\n18.6\" Height\u003cbr\u003e\n4.75\" Front Width\u003cbr\u003e\n5.75\" Rear Width\u003cbr\u003e","brand":"TrackSpec","offers":[{"title":"I dont need it my car is a GT","offer_id":52916839350453,"sku":"S550DRHL-gt","price":234.99,"currency_code":"USD","in_stock":true},{"title":"I have a non GT and need templates","offer_id":52917423112373,"sku":"S550DRHL-non-gt","price":234.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/2015-2017_mustang_gt_direct_replacement_hood_louvers.jpg?v=1785522592"},{"product_id":"2015-2017-mustang-gt4-full-louver-kit","title":"2015-2017 Mustang GT4 Full Hood Louver Kit","description":"\u003cp\u003e2015-2017 Mustang GT4 Full Hood Vent Louver Kit\u003c\/p\u003e\n\u003cp\u003eThis kit includes GT4 Style Center vent and direct replacement GT side vents.\u003cbr\u003eAlso Includes backing plates for secure mounting. The Center vent REQUIRES hood cutting and drilling.\u003cbr\u003eSide Vents require minor trimming of underside of hood, but not the top side. Side vents are direct replacement drop in vents. Side vents do not require drilling. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"box-collateral\"\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, installation instructions, and necessary spacers for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003cbr\u003eCenter\u003cbr\u003e18.5\" Height\u003cbr\u003e20.25\" Front Width\u003cbr\u003e22.5\" Rear Width\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSide Vents\u003c\/strong\u003e\u003cbr\u003e18.6\" Height\u003cbr\u003e4.75\" Front Width\u003cbr\u003e5.75\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"No Thanks, I dont need it notched for boss 302 clearance","offer_id":52916839809205,"sku":"S550GT4HL","price":379.99,"currency_code":"USD","in_stock":true},{"title":"Yes Please","offer_id":52917425799349,"sku":"S550GT4HL-notched","price":379.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/2015-2017-mustang-gt4-full-louver-kit.jpg?v=1785522605"},{"product_id":"2018-2021-mustang-gt4-full-hood-louver-kit","title":"2018-2021 Mustang GT4 Full Hood Louver Kit","description":"\u003cp\u003e2018-2021 Mustang GT4 Full Hood Vent Louver Kit\u003c\/p\u003e\n\u003cp\u003eThis kit includes GT4 Style Center vent and cut in side vents.\u003cbr\u003eAlso Includes backing plates for secure mounting. The Center and side vents REQUIRES hood cutting and drilling.\u003cbr\u003eSide Vents are designed to be placed in the factory recessed area behind the factory nostrils.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"box-collateral\"\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, installation instructions, and necessary spacers for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eDimensions:\u003cbr\u003eCenter\u003cbr\u003e18.5\" Height\u003cbr\u003e16.25\" Front Width\u003cbr\u003e18.5\" Rear Width\u003cbr\u003e\u003cbr\u003eSide Vents\u003cbr\u003e19.88\" Height\u003cbr\u003e8\" Front Width\u003cbr\u003e10.25\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916839940277,"sku":"MUST18HL","price":374.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/2018-2021-mustang-gt4-full-hood-louver-kit.jpg?v=1785522622"},{"product_id":"2018-2021-mustang-gt4-side-only-hood-louver-kit","title":"2018-2021 Mustang GT4 SIDE ONLY Hood Louver Kit","description":"\u003cp\u003e2018-2021 Mustang GT4 SIDE ONLY Hood Vent Louver Kit\u003c\/p\u003e\n\u003cp\u003eThis kit includes GT4 Style side vents ONLY.\u003cbr\u003eThe Center and side vents REQUIRES hood cutting and drilling.\u003cbr\u003eSide Vents are designed to be placed in the factory recessed area behind the factory nostrils.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"box-collateral\"\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, installation instructions, and necessary spacers for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eDimensions:\u003cbr\u003eSide Vents\u003cbr\u003e19.88\" Height\u003cbr\u003e8\" Front Width\u003cbr\u003e10.25\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916841185461,"sku":"18MUSTSL","price":244.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/2018-2021-mustang-gt4-side-only-hood-louver-kit.jpg?v=1785522631"},{"product_id":"2016-2018-mustang-gt350-gt4-full-hood-louver-kit","title":"2016-2018 Mustang GT350 GT4 Full Hood Louver Kit","description":"\u003cp\u003e2016-2018 Mustang GT350 GT4 Full Hood Vent Louver Kit\u003c\/p\u003e\n\u003cp\u003eThis kit includes GT4 Style Center vent and GT4 Style side vents.\u003cbr\u003eThe Center and side vents REQUIRES hood cutting and drilling.\u003cbr\u003eDesigned to cover the factory center vent hole.\u003cbr\u003eEngineered design reinforces the hood structure making the hood rigid after installation.\u003cbr\u003eTested in trans am, SCCA, NASA race vehicles for 6 months before released for production to assure factory fit, finish, rigidity, and function.\u003cbr\u003eAll measurements, templates, instructions, and hardware is provided.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"box-collateral\"\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, installation instructions, and necessary spacers for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003cbr\u003eCenter\u003cbr\u003e18.5\" Height\u003cbr\u003e16.25\" Front Width\u003cbr\u003e18.5\" Rear Width\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSide Vents\u003c\/strong\u003e\u003cbr\u003e19.88\" Height\u003cbr\u003e8\" Front Width\u003cbr\u003e10.25\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916841250997,"sku":"GT350GT4HL","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/2016-2018-mustang-gt350-gt4-full-hood-louver-kit.jpg?v=1785522648"},{"product_id":"1967-1972-chevy-c10-truck-hood-vent-kit","title":"1967-1972 Chevy C10 Truck Hood Vent Kit","description":"\u003cp\u003e1967-1972 Chevy C10 Truck Hood Vent Louver Kit\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for the C10 truck from 1967-1972, these massive vents allow hot air to escape your engine bay and reduce coolant and underhood temps!\u003cbr\u003eInstalled on several pro touring C10 builds.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"box-collateral\"\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, and installation instructions for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003eDimensions:\u003cbr\u003e25\" Height\u003cbr\u003e16.5\" Front Width\u003cbr\u003e18\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916841447605,"sku":"C106772HL","price":364.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/1967-1972-chevy-c10-truck-hood-vent-kit.jpg?v=1785522662"},{"product_id":"1967-1972-gmc-truck-hood-vent-kit","title":"1967-1972 GMC Truck Hood Vent Kit","description":"Designed specifically for the GMC truck from 1967-1972, these massive vents allow hot air to escape your engine bay and reduce coolant and underhood temps!\u003cbr\u003e\nInstalled on several pro touring gmc pickup builds.\u003cbr\u003e\u003cbr\u003e\n\n\n\u003cdiv class=\"box-collateral\"\u003e\n        \u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature.\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, and installation instructions for a factory quality installation. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability. \n\u003c\/li\u003e\n\u003c\/ul\u003e    \u003c\/div\u003e\n\n\u003cbr\u003e\n\nDimensions:\u003cbr\u003e\n25\" Height\u003cbr\u003e\n16.5\" Front Width\u003cbr\u003e\n18\" Rear Width\u003cbr\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916842561717,"sku":"C106772HL-Gmc","price":364.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/1967-1972-chevy-c10-truck-hood-vent-kit_1.jpg?v=1785522673"},{"product_id":"1973-1999-chevy-c10-truck-hood-vent-kit","title":"1973-1999 Chevy C10 Truck Hood Vent Kit","description":"\u003cp\u003eDesigned specifically for the C10 truck from 1973-1999, these massive vents allow hot air to escape your engine bay and reduce coolant and underhood temps!\u003cbr\u003eInstalled on several pro touring C10 builds.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"box-collateral\"\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, and installation instructions for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003cbr\u003e26\" Height\u003cbr\u003e15.5\" Front Width\u003cbr\u003e16\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916842627253,"sku":"C107380HL","price":364.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/1973-1999-chevy-c10-truck-hood-vent-kit.jpg?v=1785522685"},{"product_id":"1973-1999-gmc-truck-hood-vent-kit","title":"1973-1999 GMC Truck Hood Vent Kit","description":"Designed specifically for the GMC truck from 1973-1999, these massive vents allow hot air to escape your engine bay and reduce coolant and underhood temps!\u003cbr\u003e\nInstalled on several pro touring GMC builds.\u003cbr\u003e\u003cbr\u003e\n\n\u003cdiv class=\"box-collateral\"\u003e\n        \u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature.\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, and installation instructions for a factory quality installation. \n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability. \n\u003c\/li\u003e\n\u003c\/ul\u003e    \u003c\/div\u003e\n\n\u003cbr\u003e\n\n\nDimensions:\u003cbr\u003e\n26\" Height\u003cbr\u003e\n15.5\" Front Width\u003cbr\u003e\n16\" Rear Width\u003cbr\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916843184309,"sku":"C107380HL","price":364.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/1973-1999-chevy-c10-truck-hood-vent-kit_1.jpg?v=1785522696"},{"product_id":"1967-1969-camaro-t1-hood-louvers","title":"1967-1969 Camaro T1 Hood Louvers","description":"\u003cp\u003e1967-1969 Camaro T1 Hood Vent Louvers\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for the first generation Camaro's hood lines and low pressure zones behind the radiator and above the wheel arches.\u003cbr\u003eThe design works well with several cowl induction hood style set ups for late 60s and early 70s muscle cars that need heat extraction\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"box-collateral\"\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, and installation instructions for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003cbr\u003e15\" Height\u003cbr\u003e9.25\" Front Width\u003cbr\u003e9\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916844658869,"sku":"1GCAT1","price":224.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/1967-1969-camaro-t1-hood-louvers_1.jpg?v=1785522712"},{"product_id":"1967-1969-camaro-rs-ss-drop-in-hood-louvers","title":"1967-1969 Camaro RS-SS Drop In Hood Louvers","description":"\u003cp\u003e1967-1969 Camaro RS-SS Drop In Hood Vent Louvers\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for RS\/SS style hoods with factory false vents in the center of the hood.\u003cbr\u003eThis kit is designed to drop into the recessed area of the factory equipped RS\/SS style hoods.\u003cbr\u003eCUTTING IS REQUIRED to allow the vents to drop into place and become functional.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"box-collateral\"\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, and installation instructions for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003eDimensions:\u003cbr\u003e4.5\" wide\u003cbr\u003e17\" Tall front to rear\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916844855477,"sku":"1GCAMRSSS","price":224.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/1967-1969-camaro-rs-ss-drop-in-hood-louvers.jpg?v=1785522725"},{"product_id":"1970-1973-camaro-t1-hood-louvers","title":"1970-1973 Camaro T1 Hood Louvers","description":"\u003cp\u003e1970-1973 Camaro T1 Hood Vent Louvers\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for the second generation Camaro's hood lines and low pressure zones behind the radiator and above the wheel arches.\u003cbr\u003eThis kit is only compatible with the 1970 through 1973 model years, and includes a pair of left and right louver sections\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"box-collateral\"\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, and installation instructions for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003eDimensions:\u003cbr\u003e22.5\" Height\u003cbr\u003e10.5\" Front Width\u003cbr\u003e13\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916845084853,"sku":"2GCAMHL","price":339.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/1970-1973-camaro-t1-hood-louvers.jpg?v=1785522739"},{"product_id":"1970-1981-camaro-fender-vents-universal","title":"1970-1981 Camaro Fender Vents - Universal","description":"\u003cp\u003e1970-1981 Camaro Fender Vents - Universal\u003c\/p\u003e\n\u003cp\u003eModeled directly after the factory Z28 fender vents with identical dimensions.\u003cbr\u003eAdd Z28 styling to your factory camaro fenders.\u003cbr\u003eIncludes Rivets and holes must be drilled into your fender for mounting.\u003cbr\u003e100% Functional\u003cbr\u003eIncludes templates for cutting and drilling.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"box-collateral\"\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, and installation instructions for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003eDimensions:\u003cbr\u003e13.5\" Height\u003cbr\u003e7.5\" Front Width\u003cbr\u003e7.5\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916846002357,"sku":"7081CAMFV","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/1970-1981-camaro-fender-vents-universal.jpg?v=1785522750"},{"product_id":"1970-1981-camaro-z28-fender-vents-direct-replacement","title":"1970-1981 Camaro Z28 Fender Vents - Direct Replacement","description":"\u003cp\u003e1970-1981 Camaro Z28 Fender Vents - Direct Replacement\u003c\/p\u003e\n\u003cp\u003eModeled directly after the factory Z28 fender vents with identical dimensions.\u003cbr\u003eDesigned to replace your factory vents when equipped. For universal installs, see P\/N\" 7081CAMFV\u003cbr\u003eIncludes washers, nuts and bolts.\u003cbr\u003e100% Functional\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"box-collateral\"\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, and installation instructions for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003eDimensions:\u003cbr\u003e13.5\" Height\u003cbr\u003e7.5\" Front Width\u003cbr\u003e7.5\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916846592181,"sku":"7081CAMFV-DR","price":224.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/1970-1981-camaro-z28-fender-vents-direct-replacement.jpg?v=1785522758"},{"product_id":"1985-1990-camaro-iroc-z28-hood-vent-kit","title":"1985-1990 Camaro IROC\/Z28 Hood Vent Kit","description":"\u003cp\u003e1985-1990 Camaro IROC\/Z28 Hood Vent Kit\u003c\/p\u003e\n\u003cp\u003eThis kit includes 2 heat extractors designed to replace the factory plastic units.\u003cbr\u003eDesigned specifically for 85-90 IROC recessed hood vent area and low pressure zones.\u003cbr\u003eDoes not fit 82-84 Z28 Hoods. If interested in those years, please contact us.\u003cbr\u003eThe louvers can be installed on any flat camaro hood, including the flat RS hoods to give your Camaro the IROC look with added heat extraction vents.\u003cbr\u003eThese are functional hood vents which require holes to be cut into your existing hood panel.\u003cbr\u003eIncluded in kit: Templates for cutting, rivets, washers, installation instructions, and any necessary spacers for a factory style installation.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"box-collateral\"\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, installation instructions, and necessary spacers for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003eDimensions:\u003cbr\u003e28\" Height\u003cbr\u003e6\" Front Width\u003cbr\u003e10.5\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916846690485,"sku":"IROCT1HL-Silver","price":329.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/1985-1990-camaro-iroc-z28-hood-vent-kit.jpg?v=1785522775"},{"product_id":"1982-1984-camaro-z28-hood-vent-kit","title":"1982-1984 Camaro Z28 Hood Vent Kit","description":"\u003cp\u003e1982-1984 Camaro Z28 Hood Vent Kit\u003c\/p\u003e\n\u003cp\u003eThis kit includes 2 heat extractors designed to replace the factory plastic units.\u003cbr\u003eDesigned specifically for 82-84 Z28 recessed hood vent area and low pressure zones.\u003cbr\u003eDoes not fit 85-90 IROC Z28 Hoods. We have a separate listing for 85-90 IROCs\u003cbr\u003eThe louvers can be installed on any flat camaro hood, including the flat RS hoods to give your Camaro the IROC look with added heat extraction vents.\u003cbr\u003eThese are functional hood vents which require holes to be cut into your existing hood panel.\u003cbr\u003eIncluded in kit: Templates for cutting, rivets, washers, installation instructions, and any necessary spacers for a factory style installation.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"box-collateral\"\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, installation instructions, and necessary spacers for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003eDimensions:\u003cbr\u003e28\" Height\u003cbr\u003e4\" Front Width\u003cbr\u003e8\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916846887093,"sku":"8284Z28","price":339.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/1982-1984-camaro-z28-hood-vent-kit.jpg?v=1785522782"},{"product_id":"2010-2015-camaro-t1-center-hood-louvers","title":"2010-2015 Camaro T1 Center Hood Louvers","description":"\u003cp\u003e2010-2015 Camaro T1 Center Hood Vent Louvers\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for the fifth generation Camaro's hood lines and low pressure zones behind the radiator. This kit only includes a center section.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"box-collateral\"\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, and installation instructions for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003cbr\u003e13.5\" Height\u003cbr\u003e20.5\" Front Width\u003cbr\u003e22\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916846919861,"sku":"5GCAMHL","price":214.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/2010-2015-camaro-t1-center-hood-louvers.jpg?v=1785522794"},{"product_id":"2010-2015-camaro-z28-st2-center-hood-louver","title":"2010-2015 Camaro Z28 ST2 Center Hood Louver","description":"\u003cp\u003e2010-2015 Camaro Z28 ST2 Center Hood Vent Louver\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for the fifth generation Camaro's hood lines and low pressure zones behind the radiator and above the wheel arches. This kit only includes a center section.\u003cbr\u003eNASA Legal for ST2 area requirements.\u003cbr\u003eSame product used on Russ Taylor's podium winning ST2 Z28 in NASA West Coast Championship.\u003cbr\u003eThis product does fit early 5G Camaro SS Hoods\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"box-collateral\"\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, and installation instructions for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003eDimensions:\u003cbr\u003e25.5\" Height\u003cbr\u003e20.5\" Front Width\u003cbr\u003e23.25\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916847280309,"sku":"5GCAMZ28","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/2010-2015-camaro-z28-st2-center-hood-louver.jpg?v=1785522810"},{"product_id":"2010-2015-camaro-t1-side-louvers","title":"2010-2015 Camaro T1 Side Louvers","description":"\u003cp\u003e2010-2015 Camaro T1 Side Vent Louvers\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for the fifth generation Camaro's hood lines and low pressure zones behind the radiator. This kit only includes side vents.\u003cbr\u003eNotched to clear strut area on sides of hood.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"box-collateral\"\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, and installation instructions for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003eDimensions:\u003cbr\u003e17\" Height\u003cbr\u003e8.5\" Front Width\u003cbr\u003e9\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916848099509,"sku":"5GCAMSL","price":234.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/2010-2015-camaro-t1-side-louvers-2.jpg?v=1785522820"},{"product_id":"2015-2020-ford-raptor-style-fender-vents-universal","title":"2015-2020 Ford Raptor Style Fender Vents Universal","description":"\u003cp\u003e2015-2020 Ford Raptor Style Fender Vents Universal\u003c\/p\u003e\n\u003cp\u003eModeled directly after the 2015+ fender vents with identical dimensions.\u003cbr\u003eHas not been fitted into a factory raptor fender.\u003cbr\u003eGet the Raptor look with these universal fender vents!\u003cbr\u003eIncludes washers, nuts and bolts.\u003cbr\u003e100% Functional\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"box-collateral\"\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, and installation instructions for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003eDimensions:\u003cbr\u003e13\" Height\u003cbr\u003e3.75\" Wide\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916849180853,"sku":"RAPTORFV","price":204.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/2015-2020-ford-raptor-style-fender-vents-universal_1.jpg?v=1785522830"},{"product_id":"2012-2020-toyota-fr-s-brz","title":"2012-2020 Toyota FR-S \/ BRZ Hood Vent Kit","description":"\u003cp\u003e2012-2020 Toyota FR-S \/ BRZ Hood Vent Kit\u003c\/p\u003e\n\u003cp\u003eThe Trackspec team of engineers is excited to introduce the FRS BRZ Heat Extracting Louver kit! We spent the day at WSIR doing before and after pressure testing to find the optimum placement and design for this extractor kit. We strapped our proprietary multi position pressure testing rig into the front seat of Mike Kang's very fast BRZ and gathered data thru the day. The results were excellent! We saw an average of a 43% reduction in underhood pressure (lift) over the area of the hood. We further verified flow by visual tuft testing as seen in the high speed photos. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFully tested with data collection at WSIR under race conditions \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eData analysis yielded a 43% reduction in lift. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, and installation instructions for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eDimensions:\u003cbr\u003e22\" Height\u003cbr\u003e10.5\" Front Width\u003cbr\u003e13.5\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916866154677,"sku":"FT86HL","price":334.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/2012-2020-toyota-fr-s-brz.jpg?v=1785523177"},{"product_id":"2013-2016-ford-fiesta-st-hood-vent-kit","title":"2013-2016 Ford Fiesta ST Hood Vent Kit","description":"\u003cp\u003e2013-2016 Ford Fiesta ST Hood Vent Kit\u003c\/p\u003e\n\u003cp\u003eThis kit includes only the 2 side heat extracting vents for the Ford Fiesta ST\u003cbr\u003eMay Fit other ford fiesta's with same hood profile.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, installation instructions, and necessary spacers for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eDimensions:\u003cbr\u003e17\" Height\u003cbr\u003e8.75\" Front Width\u003cbr\u003e9.25\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916866515125,"sku":"FIESHL","price":234.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/2013-2016-ford-fiesta-st-hood-vent-kit.jpg?v=1785523191"},{"product_id":"2015-2018-ford-focus-st-rs-hood-vent-kit","title":"2015-2018 Ford Focus ST\/RS Hood Vent Kit","description":"\u003cp\u003e2015-2018 Ford Focus ST\/RS Hood Vent Kit\u003c\/p\u003e\n\u003cp\u003eThis kit includes only the 2 side heat extracting vents for the Ford Focus RS\/ST\/Base\u003cbr\u003eMay Fit other Ford Focus with same hood profile.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, installation instructions, and necessary spacers for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003cbr\u003e17\" Height\u003cbr\u003e8.75\" Front Width\u003cbr\u003e9.25\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916866678965,"sku":"FOCUSHL","price":234.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/2015-2018-ford-focus-st-rs-hood-vent-kit.jpg?v=1785523205"},{"product_id":"1999-2009-honda-s2000-hood-louvers","title":"1999-2009 Honda S2000 Hood Louvers","description":"\u003cp\u003e1999-2009 Honda S2000 Hood Vent Louvers\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for S2000 hood lines and low pressure zones behind the radiator.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, installation instructions, and necessary spacers for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003cbr\u003e22\" Height\u003cbr\u003e10.6\" Front Width\u003cbr\u003e13.5\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916868513973,"sku":"S2KHL","price":339.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/1999-2009-honda-s2000-hood-louvers.jpg?v=1785523226"},{"product_id":"1999-2009-honda-s2000-fender-vents","title":"1999-2009 Honda S2000 Fender Vents","description":"\u003cp\u003e1999-2009 Honda S2000 Fender Vents\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for S2000 Fender lines to fit perfectly with the body lines and vent high pressure in the wheel well.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, installation instructions, and necessary spacers for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e:\u003cbr\u003e22\" Height\u003cbr\u003e10.6\" Front Width\u003cbr\u003e13.5\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916868972725,"sku":"S2KFV","price":209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/1999-2009-honda-s2000-fender-vents.jpg?v=1785523239"},{"product_id":"porsche-944-hood-louvers","title":"Porsche 944 Hood Louvers","description":"\u003cp\u003ePorsche 944 Hood Vent Louvers\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Porsche 944 hood lines and low pressure zones behind the radiator.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, installation instructions, and necessary spacers for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eDimensions:\u003cbr\u003e22\" Height\u003cbr\u003e10.6\" Front Width\u003cbr\u003e13.5\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916870086837,"sku":"944HL","price":339.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/porsche-944-hood-louvers.jpg?v=1785523249"},{"product_id":"2002-2008-nissan-350z-hood-vent-kit","title":"2002-2008 Nissan 350Z Hood vent kit","description":"\u003cp\u003e2002-2008 Nissan 350Z Hood vent kit\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for the 350Z hood lines and low pressure areas.\u003cbr\u003eIncludes a center vent and 2 side vents. Use options below to change configuration.\u003cbr\u003eNASA Legal for ST2 area requirements.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, and installation instructions for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003cbr\u003eCenter Vent\u003cbr\u003e12.6\" Height\u003cbr\u003e13.5\" Front Width\u003cbr\u003e15.4\" Rear Width\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSide Vent\u003c\/strong\u003e\u003cbr\u003e17.8\" Height\u003cbr\u003e8.75\" Front Width\u003cbr\u003e8.75\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916870119605,"sku":"350ZT1HL","price":364.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/2002-2008-nissan-350z-hood-vent-kit.jpg?v=1785523261"},{"product_id":"2002-2008-nissan-350z-hood-side-vents-only","title":"2002-2008 Nissan 350Z Hood Side Vents Only","description":"\u003cp\u003e2002-2008 Nissan 350Z Hood Side Vents Only\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for the 350Z hood lines and low pressure areas.\u003cbr\u003eIncludes only 2 side vents.\u003cbr\u003eNASA Legal for ST2 area requirements.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, and installation instructions for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eDimensions:\u003cbr\u003eSide Vent\u003cbr\u003e17.8\" Height\u003cbr\u003e8.75\" Front Width\u003cbr\u003e8.75\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916870185141,"sku":"350ZSL","price":234.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/2002-2008-nissan-350z-hood-side-vent-kit-1.jpg?v=1785523272"},{"product_id":"2008-2020-nissan-370z-hood-vent-kit","title":"2008-2020 Nissan 370Z Hood vent kit","description":"\u003cp\u003e2008-2020 Nissan 370Z Hood vent kit\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for the 370Z hood lines and low pressure areas.\u003cbr\u003eIncludes a center vent and 2 side vents. Use options below to change configuration.\u003cbr\u003eNASA Legal for ST2 area requirements.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, and installation instructions for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eDimensions:\u003cbr\u003eCenter Vent\u003cbr\u003e14.5\" Height\u003cbr\u003e18.5\" Front Width\u003cbr\u003e23.1\" Rear Width\u003cbr\u003e\u003cbr\u003eSide Vent\u003cbr\u003e17\" Height\u003cbr\u003e5.5\" Front Width\u003cbr\u003e6.0\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916870250677,"sku":"370ZHL","price":364.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/2008-2020-nissan-370z-hood-vent-kit.jpg?v=1785523284"},{"product_id":"2008-2020-nissan-370z-hood-vent-kit-1","title":"2008-2020 Nissan 370Z Hood Side Vents Only","description":"\u003cp\u003e2008-2020 Nissan 370Z Hood Side Vents Only\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for the 370Z hood lines and low pressure areas.\u003cbr\u003eIncludes 2 side vents. Use options below to change configuration.\u003cbr\u003eNASA Legal for ST2 area requirements.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, and installation instructions for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eDimensions:\u003cbr\u003eSide Vent\u003cbr\u003e17\" Height\u003cbr\u003e5.5\" Front Width\u003cbr\u003e6.0\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916871299253,"sku":"370ZSL","price":234.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/2008-2020-nissan-370z-hood-vent-kit-side.jpg?v=1785523296"},{"product_id":"2004-2006-pontiac-gto-hood-vent-kit","title":"2004-2006 Pontiac GTO Hood Vent Kit","description":"\u003cp\u003e2004-2006 Pontiac GTO Hood Vent Kit\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for the Pontiac GTO hood lines and low pressure zones for maximum heat extraction.\u003cbr\u003eThis kit includes a pair of left and right hood vents that install on top of the existing GTO hood nostrils.\u003cbr\u003eNASA Legal for ST2 area requirements.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, and installation instructions for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eDimensions:\u003cbr\u003e18.9\" Height\u003cbr\u003e8.33\" Front Width\u003cbr\u003e10\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916871692469,"sku":"46GTOHL","price":239.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/2004-2006-pontiac-gto-hood-vent-kit.jpg?v=1785523314"},{"product_id":"2006-2007-subaru-wrx-sti-hood-vent-kit","title":"2006-2007 Subaru WRX STI Hood Vent Kit","description":"\u003cp\u003e2006-2007 Subaru WRX STI Hood Vent Kit\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for the Subaru WRX, 2.5RS, and STI Hood lines and low pressure zones behind the radiator.\u003cbr\u003eThis kit will fit an STI and WRX hood with scoop, but it is recommended that the scoop be deleted to prevent heat extraction disruption from the vents when using the center vent in addition to the sides.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, and installation instructions for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eDimensions:\u003cbr\u003eCenters each\u003cbr\u003e14.1\" Height\u003cbr\u003e7.7\" Front Width\u003cbr\u003e11.1\" Rear Width\u003cbr\u003e\u003cbr\u003eSides\u003cbr\u003e24\" Height\u003cbr\u003e8\" Front Width\u003cbr\u003e7.5\" Rear Width\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916871954613,"sku":"67SUBHL","price":334.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/2006-2007-subaru-wrx-sti-hood-vent-kit.jpg?v=1785523324"},{"product_id":"2006-2007-subaru-wrx-sti-hood-hood-vents-only","title":"2006-2007 Subaru WRX STI Side Hood Vents Only","description":"\u003cp\u003e2006-2007 Subaru WRX STI Side Hood Vents Only\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for the Subaru WRX, 2.5RS, and STI Hood lines and low pressure zones behind the radiator.\u003cbr\u003eThis kit ONLY includes the side vents and not the center vents.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, and installation instructions for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowder coated Satin Black for clean appearance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eDimensions:\u003cbr\u003e24\" Height\u003cbr\u003e8\" Front Width\u003cbr\u003e7.5\" Rear Width\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916872544437,"sku":"67SUBSL","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/2006-2007-subaru-wrx-sti-hood-vent-side-kit-2.jpg?v=1785523335"},{"product_id":"2007-2009-mazda-speed3-hood-vent-kit","title":"2007-2009 Mazda Speed3 Hood Vent Kit","description":"\u003cp\u003e2007-2009 Mazda Speed3 Hood Vent Kit\u003c\/p\u003e\n\u003cp\u003eThis kit includes a T1 center vent and 2 side vents.\u003cbr\u003eThis kit will be sold as a universal fit kit for the Mazda 3speed. Please see photos of fitment and design.\u003cbr\u003eThis product may fit other model years, please check your fitment before purchasing.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized louver design to maximize extraction flow velocities within a vehicle in motion \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces under hood pressure delta to reduce front end lift and increase net vehicle downforce. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces under hood temperatures by extracting heat and allowing fresh cold air to enter the engine bay. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximize life of engine accessories by reducing overall operating temperature. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreases dense, cold air flow through radiator to promote lower coolant temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLouver backbone design maintains hood structural rigidity. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContoured to fit your specific hood curve. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls easily with supplied templates. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded in kit: Templates for cutting, rivets, washers, installation instructions, and necessary spacers for a factory quality installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eDimensions\u003cbr\u003eCenter\u003cbr\u003eHeight - 9.4\"\u003cbr\u003eFront Width - 20\"\u003cbr\u003eRear Width - 23\"\u003cbr\u003e\u003cbr\u003eSide\u003cbr\u003eHeight - 18.6\"\u003cbr\u003eFront Width - 4.75\"\u003cbr\u003eRear Width - 5.75\"\u003cbr\u003e\u003c\/p\u003e","brand":"TrackSpec","offers":[{"title":"Default Title","offer_id":52916872609973,"sku":"MAZSP3HL","price":334.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1018\/7387\/7173\/files\/2007-2009-mazda-speed3-hood-vent-kit.jpg?v=1785523348"}],"url":"https:\/\/turbonasty.com\/collections\/hood-vents.oembed","provider":"Turbo Nasty","version":"1.0","type":"link"}