TrackSpec 1997-2004 C5 Corvette 4 Point Back Half Roll Cage Kit
$999.99
In stock
SKU
C5CAGEKITBACKHALF
Includes Back Half Weld in section only. Main hoop, Harness bar, diagonal, rear kickers and rear X brace.
Main hoop comes full welded, ready to install.
Designed and CNC Notched and bent in southern california!
Main hoop properly mounted to top of the frame.
Main Hoop close out plates hide cut open area in rear bulk head - Standard
DOES NOT REQUIRE gas tank removal, our videos show you how.
All bars are CNC marked and numbered in the order of installation.
All intersecting points are marked with a fish mouth for perfect bar positioning.
Made of .095 mild steel or .120 mild steel. Choose in options.
Instructional videos with measurements and fabricator tips included for an easy install.
**** This is a 4 point back half version of our full cage kit. Includes ONLY main hoop, diagonal, harness bar, rear kicker bars, and rear X brace****
The most comprehensive and installer friendly kit on the market.
This cage kit is a collaboration of SPEC Corvette series drivers, engineers, and fabricators to produce not only the best fitting kit on the market, but one that can be easily installed as a DIY kit.
The priority was to build the safest kit on the market with main hoop mounting on top of the frame, not on the side or on the composite floor like other kits. DOES NOT require the removal of the gas tanks to install. All tubes are CNC marked, notched and bent with intersecting points marked for a no guess install.
Its a truly hold and weld set up.
The full front half can be added later if you decide to go wheel to wheel racing. This is a perfect kit to add safety without going to our full cage kit that can be added on later.
Our instructional videos detail all the measurements and methods to open the car up for a quality install.
Main hoop comes full welded, ready to install.
Designed and CNC Notched and bent in southern california!
Main hoop properly mounted to top of the frame.
Main Hoop close out plates hide cut open area in rear bulk head - Standard
DOES NOT REQUIRE gas tank removal, our videos show you how.
All bars are CNC marked and numbered in the order of installation.
All intersecting points are marked with a fish mouth for perfect bar positioning.
Made of .095 mild steel or .120 mild steel. Choose in options.
Instructional videos with measurements and fabricator tips included for an easy install.
**** This is a 4 point back half version of our full cage kit. Includes ONLY main hoop, diagonal, harness bar, rear kicker bars, and rear X brace****
The most comprehensive and installer friendly kit on the market.
This cage kit is a collaboration of SPEC Corvette series drivers, engineers, and fabricators to produce not only the best fitting kit on the market, but one that can be easily installed as a DIY kit.
The priority was to build the safest kit on the market with main hoop mounting on top of the frame, not on the side or on the composite floor like other kits. DOES NOT require the removal of the gas tanks to install. All tubes are CNC marked, notched and bent with intersecting points marked for a no guess install.
Its a truly hold and weld set up.
The full front half can be added later if you decide to go wheel to wheel racing. This is a perfect kit to add safety without going to our full cage kit that can be added on later.
Our instructional videos detail all the measurements and methods to open the car up for a quality install.