2-BBL TB Fuel Injection System

Deuces Wild 2-BBL TBI

Utilizes two 100 lb./hr. fuel injectors, giving the system the capability of supporting up to 350 horsepower. The system includes the throttle body (with integrated fuel injectors, TPS sensor, MAP sensor, IAT sensor, and stepper motors), wiring harness, Bosch 4.9 wideband O2 sensor, ECU, & handheld programmer for easy tuning and monitoring of engine data.

TBI system fits any 2300-flange 2-barrel intake manifold and is designed for easy installation and tuning. Installation is straightforward and easy, and the system includes everything you need to get on the road or track quickly. The calibration wizard and self-tuning features mean that advanced tuning knowledge or experience is not required.

Whether you are building a budget beater or a boosted racing car, ACES EFI’s Deuces Wild™ EFI kit has the technology and advanced features that you need in an easy-to-install and easy-to-tune package so you can take your ride to the next level!

- Easy DIY Installation
- 2300 flange throttle body for easy carburetor replacement
- Two integrated 100 lb/hr Fuel Injectors
- Integrated TPS, MAP, and IAT Sensors
- System Supports up to 350 Horsepower
- Integrated Ignition Timing Control and Coil Driver
- Easy-to-Install Design, can easily be done by the average enthusiast
- Easy-to-Use Calibration Wizard Makes Initial Start-up Simple and Easy
- No Custom Tuning Required
- Adaptive Self-Tuning Strategy for Idle and Fuel Control
- Dual Electric Fan Control
- High-quality Bosch 4.9 wideband sensor
- High-Resolution 5-inch Full Color Touchscreen Handheld Controller for Initial Setup, Tuning, and Gauge Displays
- CAN Communication for Handheld Controller-Based Calibration and Display
- Available finishes: Black Ceramic

TOUCH SCREEN CONTROL

Learn to expect more from your ride

EASY TO PROGRAM AND ADJUST

WITH FAST RESPONSE, REAL-TIME IGNITION,AND NO TIMING DELAY

THE ULTIMATE EFI EXPERIENCE

EASY TO USE AND INSTALL

- 2300 flange throttle body for easy carburetor replacement

- System Supports up to 350 Horsepower
- No Custom Tuning Required.

What's Required?

A complete high pressure EFI fuel system must be installed for the KILLSHOT EFI system. Depending on your engine combination, the KILLSHOT EFI system requires a minimum of 42-48 psi to operate and it can be used with a return or returnless fuel system. When selecting a pump, regulator and lines, be sure each component is designed to perform at high pressure.