LS Engine Swap Oil Pan w 10an Fittings
As low as
$189.99
In stock
SKU
HZ-9733
LS ENGINES OIL PAN, 7 QT, -10AN FITTING
Designed for GM LS engines only. Requires oil filter relocation using two -10 AN male fittings (45° or 90° hose ends recommended if using AN hose) on driver side of pan (Front fitting is out to filter, Rear is in from filter). Uses stock LS dipstick. Can also be used in additional applications, check dimensions for clearance. Sump is 10.25 in. wide and 8.375 in. long.
Rear Sump
Designed for GM LS engines only. Requires oil filter relocation using two -10 AN male fittings (45° or 90° hose ends recommended if using AN hose) on driver side of pan (Front fitting is out to filter, Rear is in from filter). Uses stock LS dipstick. Can also be used in additional applications, check dimensions for clearance. Sump is 10.25 in. wide and 8.375 in. long.
Rear Sump
| Sump Style: | Wet |
| Sump Location: | Rear |
| Dipstick Included: | No |
| Oil Pump Driveshaft Included: | No |
| Dipstick Provision: | No |
| Drain Plug Thread Size: | 1/2-20 in. |
| Kicked Out: | Yes |
| Kick out Position: | Driver and passenger side |
| Crank Scraper Included: | No |
| Oil Pan Finish: | EDP-Black |
| Oil Pump Included: | No |
| Pickup Included: | No |
| Windage Tray Included: | No |
| Baffled: | Yes |
| Oil Pan Material: | Steel |
| Oil Pan Depth (in) | 6.000 in. |
| Oil Pan Capacity: | 7.00 quarts |
| Gaskets Included: | No |
| Hardware Included: | No |
| Maximum Stroke with OE Rod: | 4.125 in. |
| Stroker Clearance: | Yes |
| Engine | Chevy LS |
|---|
